# version: 7.24.3 (stable) # total-memory: 2048.0MiB # cpu: tilegx # cpu-count: 9 # total-hdd-space: 128.0MiB # architecture-name: tile # board-name: CCR1009-8G-1S-1S+ # platform: MikroTik # installed-version: 7.24.3 # Flags: U - UNDOABLE # Columns: ACTION, BY, POLICY, TIME # ACTION BY POLICY TIME # U ppp secret removed alexander write 2026-11-17 17:19:40 # U log rule added iper write 2026-11-17 10:12:09 # U log rule added iper write 2026-11-17 10:12:09 # U log rule added iper write 2026-11-17 10:12:09 # U log rule added iper write 2026-11-17 10:12:09 # U log action changed iper write 2026-11-17 10:12:09 # U log action changed iper write 2026-11-17 10:12:09 # U log rule added iper write 2026-11-17 10:11:59 # U log rule added iper write 2026-11-17 10:11:59 # U log rule added iper write 2026-11-17 10:11:59 # U log rule added iper write 2026-11-17 10:11:59 # U log action changed iper write 2026-11-17 10:11:58 # U log action changed iper write 2026-11-17 10:11:58 # U log rule added iper write 2026-11-17 10:05:04 # U log rule added iper write 2026-11-17 10:05:04 # U log rule added iper write 2026-11-17 10:05:04 # U log rule added iper write 2026-11-17 10:05:04 # U log action changed iper write 2026-11-17 10:05:04 # U log action changed iper write 2026-11-17 10:05:04 # U device changed iper write 2026-11-09 13:20:55 # U device changed iper write 2026-11-09 13:18:57 # U route 10.0.247.52/30 removed iper write 2026-11-09 11:50:27 # U route 10.0.247.52/30 changed iper write 2026-11-09 09:31:54 # U route 10.0.247.52/30 changed iper write 2026-11-09 09:29:33 # U route 10.0.247.52/30 changed iper write 2026-11-09 09:26:25 # U route 10.0.247.52/30 added iper write 2026-11-09 09:25:50 # # software id = P02X-TNGH # # model = CCR1009-8G-1S-1S+ # serial number = 4AB104B0C509 /interface bridge add name=br-monitores protocol-mode=none /interface ethernet set [ find default-name=ether1 ] name=ether1-link-unifique set [ find default-name=ether2 ] name=ether2-to-olt-indios-port-1 set [ find default-name=ether4 ] name=ether4-monitor-voltagem set [ find default-name=ether7 ] name=ether7-monitor-eletrico set [ find default-name=ether8 ] name=ether8-wifi set [ find default-name=sfp1 ] name=sfp1-link-radio /interface vlan add interface=ether2-to-olt-indios-port-1 mtu=1000 name=vlan100-gerencia-olt-fiber vlan-id=100 add interface=ether2-to-olt-indios-port-1 name=vlan201-olt-fiber-pg-s2-p1 vlan-id=201 add interface=ether2-to-olt-indios-port-1 name=vlan202-olt-fiber-pg-s2-p2 vlan-id=202 add interface=ether2-to-olt-indios-port-1 name=vlan203-olt-fiber-pg-s2-p3 vlan-id=203 add interface=ether2-to-olt-indios-port-1 name=vlan204-olt-fiber-pg-s2-p4 vlan-id=204 add interface=ether2-to-olt-indios-port-1 name=vlan205-olt-fiber-pg-s2-p5 vlan-id=205 add interface=ether2-to-olt-indios-port-1 name=vlan206-olt-fiber-pg-s2-p6 vlan-id=206 add interface=ether2-to-olt-indios-port-1 name=vlan207-olt-fiber-pg-s2-p7 vlan-id=207 add interface=ether2-to-olt-indios-port-1 name=vlan208-olt-fiber-pg-s2-p8 vlan-id=208 /interface lte apn set [ find default=yes ] ip-type=ipv4 use-network-apn=no /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip pool add name=POOL_00 ranges=10.15.0.2-10.15.0.254 add name=POOL_BLOQUEIO ranges=100.100.105.2-100.100.105.254 add comment="Bloqueio IXCSoft" name=pool_bloqueio ranges=172.16.105.0/24 /ipv6 pool add name=pool_aviso_bloqueio_ipv6 prefix=2001:db8:3005::/48 prefix-length=64 /port set 0 baud-rate=auto set 1 baud-rate=auto /ppp profile add change-tcp-mss=yes dns-server=168.195.199.254,8.8.8.8 local-address=10.15.0.1 name=profile-pppoe only-one=no remote-address=POOL_00 use-compression=no use-encryption=no use-mpls=no /routing ospf instance add disabled=no in-filter-chain=ospf-in name=ospf-instance-1 out-filter-chain=ospf-out redistribute=connected,static router-id=168.195.196.44 /routing ospf area add disabled=no instance=ospf-instance-1 name=ospf-area-1 /snmp community set [ find default=yes ] addresses=168.195.196.0/22,10.0.0.0/8 name=taionet add addresses=::/0 name=ipermonitor /system logging action set 3 remote=10.10.10.105 src-address=168.195.196.44 add name=iper remote=10.10.10.105 src-address=168.195.196.44 target=remote /system script add dont-require-permissions=no name=script_backup_ftp owner=iper policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":log info \"Iniciado Backup FTP\"\r\nexport file=backup-ftp\r\n/tool fetch address=ftp.iper.net.br port=8021 src-path=backup-ftp.rsc user=bkp.taionet mode=ftp password=taionet.bkp dst-path=([/system identity get name].\".rsc\") upload=yes\r\n:log info \"Terminado Backup FTP\"\r\n" add dont-require-permissions=no name=script_backup_email owner=iper policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":log info \"Inciando Backup Email\"\r\nexport file=backup-email\r\n/tool/e-mail/send to=\"bkp.rb@iper.net.br\" subject=\"\$[/system identity get name]\" body=\"\$[/system clock get date]\" file=\"backup-email.rsc\"\r\n:log info \"Terminado Backup Email\"\r\n\n\n\n" /interface bridge port add bridge=br-monitores interface=ether4-monitor-voltagem add bridge=br-monitores interface=ether7-monitor-eletrico /ip firewall connection tracking set enabled=no udp-timeout=10s /ip settings set max-neighbor-entries=8192 /ipv6 settings set max-neighbor-entries=8192 soft-max-neighbor-entries=8191 /interface ovpn-server server add auth=sha1,md5 mac-address=FE:0B:FE:8F:D1:63 name=ovpn-server1 /interface pppoe-server server add authentication=pap default-profile=profile-pppoe disabled=no interface=ether2-to-olt-indios-port-1 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=ether-2-olt-serra-indios add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan201-olt-fiber-pg-s2-p1 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan201-olt-fiber-pg-s2-p1 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan202-olt-fiber-pg-s2-p2 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan202-olt-fiber-pg-s2-p2 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan203-olt-fiber-pg-s2-p3 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan203-olt-fiber-pg-s2-p3 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan204-olt-fiber-pg-s2-p4 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan204-olt-fiber-pg-s2-p4 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan205-olt-fiber-pg-s2-p5 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan205-olt-fiber-pg-s2-p5 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan206-olt-fiber-pg-s2-p6 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan206-olt-fiber-pg-s2-p6 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan207-olt-fiber-pg-s2-p7 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan207-olt-fiber-pg-s2-p7 add authentication=pap default-profile=profile-pppoe disabled=no interface=vlan208-olt-fiber-pg-s2-p8 keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=vlan208-olt-fiber-pg-s2-p8 add authentication=pap default-profile=profile-pppoe disabled=no interface=ether8-wifi keepalive-timeout=20 max-mru=1480 max-mtu=1480 mrru=1600 one-session-per-host=yes service-name=ether8-wifi /ip address add address=168.195.196.44 interface=lo network=168.195.196.44 add address=10.0.247.118/30 interface=ether1-link-unifique network=10.0.247.116 add address=10.15.0.1/24 interface=lo network=10.15.0.0 add address=10.0.247.114/30 interface=sfp1-link-radio network=10.0.247.112 add address=10.0.247.85/30 interface=ether2-to-olt-indios-port-1 network=10.0.247.84 add address=10.0.247.105/30 interface=ether2-to-olt-indios-port-1 network=10.0.247.104 add address=10.0.5.1/24 interface=br-monitores network=10.0.5.0 add address=10.0.80.13/30 interface=vlan100-gerencia-olt-fiber network=10.0.80.12 /ip dhcp-client add interface=ether1-link-unifique name=client1 /ip dns set servers=168.195.199.254,1.1.1.1 /ip firewall address-list add address=168.195.196.66 comment="IXCProvedor endereco IP do sistema" list=rede_local /ip firewall filter add action=drop chain=forward comment="IXCProvedor regra de aviso bloqueio" dst-address=!168.195.196.66 protocol=tcp src-address=172.16.105.0/24 add action=drop chain=forward comment="IXCProvedor regra de aviso bloqueio" dst-address=!168.195.196.66 protocol=tcp src-address-list=aviso_bloqueio add action=drop chain=forward comment="IXCProvedor regra de aviso bloqueio" dst-port=!53 protocol=udp src-address=172.16.105.0/24 add action=drop chain=forward comment="IXCProvedor regra de aviso bloqueio" dst-port=!53 protocol=udp src-address-list=aviso_bloqueio /ip firewall nat # dst-nat action is not possible when connection tracking is disabled add action=dst-nat chain=dstnat comment="IXCProvedor regra de aviso bloqueio" dst-address=!168.195.196.66 dst-port=80 protocol=tcp src-address=172.16.105.0/24 to-addresses=168.195.196.66 to-ports=8082 # dst-nat action is not possible when connection tracking is disabled add action=dst-nat chain=dstnat comment="IXCProvedor regra de aviso bloqueio" dst-address=!168.195.196.66 dst-port=80 protocol=tcp src-address-list=aviso_bloqueio to-addresses=168.195.196.66 to-ports=8082 # dst-nat action is not possible when connection tracking is disabled add action=dst-nat chain=dstnat comment="ISPBOX2 REDIRECIONA BLOQUEADOS HTTPS" dst-address=!168.195.196.42 dst-port=1-65535 protocol=tcp src-address-list=bloqueados to-addresses=168.195.196.42 to-ports=7480 # dst-nat action is not possible when connection tracking is disabled add action=dst-nat chain=dstnat comment="ISPBOX2 REDIRECIONA BLOQUEADOS" dst-port=443 protocol=tcp src-address-list=bloqueados to-addresses=168.195.196.42 to-ports=7443 /ip ipsec profile set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5 /ip route add disabled=no distance=120 dst-address=0.0.0.0/0 gateway=10.0.247.113 routing-table=main scope=30 target-scope=10 add disabled=no distance=125 dst-address=0.0.0.0/0 gateway=10.0.247.117 routing-table=main scope=30 target-scope=10 /ip service set ftp disabled=yes port=211 set telnet disabled=yes port=233 set reverse-proxy disabled=yes set www port=1024 set ssh available-from=168.195.196.42/32,177.75.162.43/32,45.163.13.106/32,10.10.10.0/24 port=2200 set winbox available-from=0.0.0.0/0 port=8277 set api available-from=168.195.196.42/32,168.195.196.66/32 set api-ssl disabled=yes /ipv6 nd # automatic dns option advertising is not started, re-apply dns config set [ find default=yes ] advertise-dns=yes /ppp aaa set interim-update=20m use-radius=yes /radius add address=168.195.196.42 comment=ISPBOX2 require-message-auth=no secret=T@ionet1010 service=ppp src-address=168.195.196.44 timeout=3s add address=168.195.196.66 comment="IXCProvedor configuracao radius" disabled=yes require-message-auth=no secret=IXC@soft2025 service=ppp,hotspot,wireless src-address=168.195.196.44 timeout=3s /radius incoming set accept=yes /routing bfd configuration add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5 /routing filter rule add chain=ospf-out disabled=no rule="if (dst in 10.15.0.0/16 && dst-len == 32) { reject; }" add chain=ospf-out disabled=no rule="accept;" add chain=ospf-in disabled=no rule="if (dst == 168.195.196.14/32) { accept; }" add chain=ospf-in disabled=no rule="if(dst==0.0.0.0/0){accept;}" add chain=ospf-in disabled=no rule="reject;" /routing ospf interface-template add area=ospf-area-1 cost=10 disabled=no interfaces=sfp1-link-radio networks=10.0.247.112/30 type=ptp add area=ospf-area-1 disabled=no interfaces=ether1-link-unifique networks=10.0.247.116/30 type=ptp /snmp set contact=noc@iper.net.br enabled=yes location=br-sc-peu /system clock set time-zone-name=America/Sao_Paulo /system identity set name=taionet-router-indios /system logging add action=iper topics=info,account add action=iper topics=critical add action=iper topics=error add action=iper topics=warning add action=iper topics=critical add action=iper topics=error add action=iper topics=warning add action=iper topics=info,account add action=iper topics=critical add action=iper topics=error add action=iper topics=warning add action=iper topics=info,account add action=iper topics=critical add action=iper topics=error add action=iper topics=warning add action=iper topics=info,account /system ntp client set enabled=yes /system ntp client servers add address=200.160.0.8 add address=200.186.40.8 /system scheduler add !days interval=1d name=script-backup-email on-event=script_backup_email policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=1970-01-01 start-time=02:00:00 add !days interval=1d name=script-backup-ftp on-event=script_backup_ftp policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon start-date=2020-02-21 start-time=01:30:00 /tool e-mail set certificate-verification=no from=envia.bkp@iper.net.br password=Iper@2022 port=587 server=mail.iper.net.br tls=starttls user=envia.bkp@iper.net.br /tool graphing interface add /tool graphing queue add /tool graphing resource add